The Debut Carbon RecordMaster is the bestselling audiophile turntable worldwide. Add in the two most popular upgrades, electronic speed change and an acrylic platter for convenience and performance, and then combine with an onboard phono preamp and a high-end analog to digital converter; voila!

A new reference standard for archiving vinyl. Optimize the signal-to-noise ratio with the record level potentiometer and you can decide what format, sample rate and bit depth via the included Vinyl Studio Lite software. Choose from AIFF, DFF,DSF, FLAC,MP3, OGG or WAV. If you’re going to create digital files from your vinyl collection, do it right! The Debut Carbon RecordMaster HiRes is the state of the art.

Upgrade Your Debut Carbon RecordMaster

Most Debut owners are already aware of Acryl it – a stylish acrylic record platter that elevates the performance of all Debut variants via resonance control. Now you can further upgrade the platter assembly with Pro-Ject’s Debut Alu Sub-Platter – a higher-precision design that adds mass to the drive system, thus delivering improved speed stability and even more resonance control than Acryl it alone.

Whether you own the new Debut Carbon EVO, Debut Carbon DC, Esprit, RecordMaster, or even the older Debut III (among others!), your analog system stands to benefit from the Debut Alu Sub-Platter.

Additional information
Weight5 kg
Dimensions32 × 41.5 × 11.8 cm

, , ,


  • Precision belt drive with decoupled synchronous motor
  • Electronic speed controller/stabiliser with 33/45 rpm, 78 rpm manual speed change
  • 8.6″ carbon tonearm
  • Heavy non-resonant acrylic platter
  • Built in MM phono preamplifier with line output
  • USB out for audio recording in PCM 24bit/192kHz or DSD256 11.2MHz
  • Simultaneously connection with amplifier & PC/Mac
  • 2M Red moving-magnet cartridge fitted
  • Dustcover included
  • Handmade in Europe



  • Nominal speeds: 33/45 r.p.m., 78 r.p.m. optional
  • Speed variance 33: 0,60%, 45: 0,50%
  • Wow and flutter 33: 0,29%, 45: 0,27%
  • Signal to noise: 68dB
  • Effective tonearm mass: 6g
  • Effective tonearm length: 8,6 ” ( 218,5mm)
  • Overhang: 18,5mm
  • Power consumption: 4W/0W in Stand-By
  • Outboard power supply: 15V / 0 – 0.8mA DC (set at 0.5mA), universal power supply


Upgrades & Add-Ons…