This real audiophile-grade integrated amplifier that strictly follows our less is more principle in a pure analogue circuitry. Therefore it offers 6 „strictly analogue“ inputs in a dual mono construction. We think, that combining analogue and digital inputs would compromise audio quality. If digital input options are needed, just add DAC Box RS and you will get a total of 14 analogue and digital input options and best possible audio reproduction! 6 stereo line level inputs (5 RCA & 1 XLR) offer a lot of connection options. Stereo Box RS can be used as integrated amplifier or as pre-amplifier with an additional subwoofer output option. Pure analogue circuitry with low noise buffer input stages offers uncompromised audiophile playback. Elegant control buttons on front and IR remote, that comes with unit, makes usage a piece of a cake. The massive metal casing is beautiful and effectively protects against interference.

Additional information
Weight 2.65 kg
Dimensions 21 × 20.6 × 7.2 cm



  • 2 x 120 Watts @ 4 ohms
  • 2 Ohms drive capability
  • Pure analogue audio circuitry
  • Dual mono & fully balanced design principle
  • 6 stereo line inputs (XLR & RCA)
  • Pre & subwoofer plus fixed level record out
  • Tube buffer input stage (6922)
  • Motor driven potentiometer
  • IR remote included
  • High class metal casing
  • DC power supply (< 1 Watt standby power)
  • Available in silver or black
  • Handmade in Europe


  • Tubes: 2 x ECC88 (6922)
  • Power output: 2 x 80W/120W at 8 ohms/4 ohms (both channels driven)
  • Frequency response: 20Hz – 50kHz (-1,5dB/-3dB)
  • Noise floor: 90dB (A weighted)
  • THD: 0,1% (100W)
  • Gain: 31dB
  • Pre out (variable): RCA/phono sockets, gain 12db
  • Subwoofer out: RCA/phono socket, gain 18dB
  • Record out (fixed): RCA/phono sockets, gain 0dB (fixed output signal)
  • Line-level inputs: 4 pair RCA/phono sockets and 1 pair XLR sockets
  • Input impedance: 50kohms for RCA inputs 1-5, 20kohms XLR input 6
  • Wiring XLR sockets: 1 ground, 2 “hot” and 3 “cold”
  • Speaker connectors: 4mm banana plugs, spades connectors or naked wire
  • Outboard power supply: ±48V/2,5A DC, suitable for your country’s mains supply
  • Power consumption: 2,5A DC, <1W in standby
  • Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V

Privacy Preference Center